Hybrid Photovoltaic Set MPPT 10xPV Monocrystalline Panel 10kW

List price: 5.332,00 
4.079,60 
Without VAT: 3.290,00 
You save: 1.252,40 € (23%)
994177
Upon Order
+

Hybrid Photovoltaic Set MPPT 10xPV Monocrystalline Panel 6kW

The set consists of 10 monocrystalline PV 10 busbar Half Cell panels with a power of 410W each , an ESB hybrid inverter , and a complete 25-meter long cabling terminated with MC4 connectors . Off-grid
installation does not require notification and approval of the power company. ESB series solar inverters

are intended for the construction of independent Off-grid 230V power supply systems based on energy obtained from PV panels, the power grid and the battery. Thanks to the modular design and flexible configuration, ESB inverters can operate in UPS mode with battery charging from PV panels and/or the power grid, they can also work in buffer systems powered only by PV panels and/or supported by energy from the grid .

 

 

The output stable sinusoidal supply voltage of 230V (220V, 240V) is perfect for powering all electrical energy receivers, and the built-in overload support system allows for powering receivers with high starting current, such as compressors in refrigerators and aggregates.

 

 


 


 

 

 

The configuration of the inverter and its control is available using an intuitive control panel , which can be installed in a convenient place within 20m from the inverter.

 

 

 

 

 

 

 

A novelty in the ESB series inverters is also the ability to control the inverter using a smartphone and a mobile application that replaces the control panel.

 

 

 

 

 

 

 

 

The most important feature of inverters is the ability to build hybrid power systems without an external battery , which has a significant impact on the cost and reliability of the system and the profitability of the investment.

 

 

 

Set contains:

  • 10 monocrystalline PV panels 410W Half Cell 10 busbar
  • Hybrid solar inverter ESB
  • 25 meter cable set with connectors
  • installation instructions
SOLAR INVERTER ESB-10kW
INPUT PARAMETERS
Nominal input voltage 230VAC
Input voltage range 90-280VAC
Operating voltage frequency 50Hz/60Hz (auto detect)
OUTPUT PARAMETERS
output voltage 230VAC
peak power 10000VA
Continuous power 5000W
Efficiency 93%
Switching time 15ms
Output voltage waveform Pure Sine
BATTERY
Battery voltage 48 VDC
Battery charging voltage 54 VDC
Battery overcharge protection  63 VDC
LANDING
Charging type MPPT
Maximum power of PV panels 5000W
MPPT operating voltage range 120-450VDC
Maximum circuit voltage of PV panels 500VDC
Maximum charging current from PV panels 80A
Maximum charging current from the mains 60A
maximum charging current 80A
DIMENSIONS WEIGHT
Dimensions D x W x Height [mm] 115 x 300 x 400
Weight [kg] 10
WORKING CONDITIONS
Working temperature -10°C ~ +50°C
Humidity 5%-95% relative humidity (non-condensing)
Degree of protection (IP) IP21
3 YEAR WARRANTY

 

 

 

Parameters / Product name Photovoltaic panel  410W
Nominal power Pmax (W): 410
Power tolerance Pmax Maximum: 0 ~ +5
Maximum voltage Vmp [V]: 31.22
Current in nominal power lmp [A]: 13.06
Open circuit voltage VOC [V]: 37.34
Short-circuit protection [A]: 25
Short-circuit current [A]: 13.7
Module efficiency [%]: 20.97
NOTC: 46°C - 50°C
Temperature coefficient Pmax: -0.36%/C
Voc temperature coefficient: -0.28%/C
Isc temperature coefficient: +0.05%/C
Maximum working voltage: 1500VDC
Working Temperature: -40°C +85°C
Maximum reverse current [A]: 25
load (snow/wind): 5400Pa/2400Pa
Cells: Mono 182×182mm
Number of cells: 108 (54×2)
Module dimensions [mm]: 1723×1133×35
Weight [kg]: 21.5
Glass: 3.2mm glass, tempered glass
junction box: IP68
Wires: 4mm2, (+)30cm, (-)30cm
Connectors: MC4-compatible
25 YEARS WARRANTY

No posts found

Write a review

Shipping

We ship Worldwide by Hellenic Post

Delivery time is 5-10 days, for Europe, 10-25 days, Worldwide.

The delivery cost is 15,00 EUR up to 2 kg 20,00 EUR up to 6 kg by post.

130,00 EUR up to 200kg by Truck. (only for Europe)

Similar products

We also recommend