Amplifier Stereo 2 x 30W Bluetooth / USD / SD Mini60
Features :
Stereo output 2*30W by two channels for 4 Ω-16Ω speakers
Built-in MP3 with USB inputs and Bluetooth inputs
The front mic with priority and muting function
Support USB record function by mic or Aux inputs
Mini Stereo Class D Amplifier with high efficiency
LED display, digital volume control
DC12- 24V power adapter and remote control included
Aluminum-alloy casing, small volume and portable, robust and durable
Ideal for small areas, such as shops, restaurants, school and office etc.
1．USB interface
It supports USB3.0, USB2.0 and the U-disk with the capacity less than 32G, with good
compatibility.
2．Digital display screen
It displays the status of the current mode.
3． Microphone input
It is inserted into the microphone. The volume can be adjusted only under the mode of AUX.
4．REC recording key
When switching over to the AUX (line input) mode and the U-disk/SD is available, press this
key to record the signal from AUX or microphone, and then store in U-disk/SD (In the format
of MP3); during the process of recording, press this key again to finish the voice recording.
5． MODE switching key
Mode switching key. It is possible to switch over among the bluetooth playing mode (BLUE),
U-disk playing mode (USB) and line input mode (AUX).
6．Previous song
Under the U-disk mode and bluetooth playing mode, press the previous song key for a long
term to select the increase of the treble equilibrium within the range of -5 to 0 to +5.
7． Next song
Under the U-disk mode and bluetooth playing mode, press the next song key for a long term to
select the increase of the bass equilibrium within the range of -5 to 0 to +5.
8． Increase of volume
The master volume is increased by 0-32.
9．Decrease of volume
The master volume is decreased by 0-32.
10． Play/pause key
1．Power input interface
DC12V~24V.
2．POWER supply switch
It is used to turn on or off the power supply.
3． LINE IN auxiliary input interface
It is used for input of the signal from external sound source. Stereo input.
4．LINE OUT auxiliary output interface
It is used to connect the external power amplifier input.
5． SPEAKER OUTPUT
The output terminal of the power amplifier. The system allows the connection of the 4Ω-16Ω
loudspeakers but not those less than 4Ω, which will cause the overloading protection of the
system. The loudspeaker may be connected to 6 DSPPA (8Ω) ceiling speakers in two groups to
the maximum extent. Please see the description below for the connection mode.
6．SD interface
It is used to connect the external SD card with great capacity. When SD card is inserted, it will
play automatically
(The short circuit of the terminals between the left and right channels shall not be allowed; the output of the power amplifier is the bridging output; the negative output shall not be connected to the enclosure or grounded)
No posts found
Shipping
We ship Worldwide by Hellenic Post
Delivery time is 5-10 days, for Europe, 10-25 days, Worldwide.
The delivery cost is 15,00 EUR up to 2 kg 20,00 EUR up to 6 kg by post.
130,00 EUR up to 200kg by Truck. (only for Europe)